Armaturenwerk Hötensleben GmbH

Jet Cleaner (TANKO-JX)

Jet Cleaner TANKO-JX Head
Jet Cleaner TANKO-JX

Cleaner with external motor: TANKO-JX series


The TANKO-JX series combines strong cleaning power with very economic use of the cleaning medium. The electric motor means that no cleaning medium is needed for driving the rotation. This allows the rotation and the speed of rotation to be easily adjusted to suit the cleaning requirements. The nozzle geometry determines the cleaning medium throughput, the range of the system and thus the possible cleaning power. These system allow the optimum cleaning force to be applied to the surface to be cleaned. The 360° spray pattern cleaning is based on 2 nozzles.

 

 

TANKO-JX70

Technical Data
Spray angle360° orbital
Material

1.4571 (316Ti), PTFE, PEEK, EPDM, iglidur® A500
1.4301 (304), 1.4401 (316), 1.4404 (316L), 1.4408 (316L), 1.4435 (316L), 1.4568 (301),
FKM, FKM with FEP coating

Operating pressureCleaning medium: 2 - 20 bar / 29 - 290 psi
Volume flow rate0.2 - 2.5 m³/h / 3.3 - 41.7 l/min / 1 - 11 gpm (US)
Cleaning radiusmax. max. 2,1 m / 6,9 ft
Wetting radiusmax. 4,3 m / 14,1 ft
BearingsBall bearing, plain bearing
Number of nozzles2, optional: 1; 3 or 4
Nozzle bore1 - 4 mm, depending on expected cleaning power

 
The technical data of the ATEX units can differ from the standard units and this data is provided in the respective operating and installation instructions.

 

 

TANKO-JX75

Technical Data
Spray angle360° orbital
Material

1.4571 (316Ti), PTFE,PEEK, EPDM, iglidur® A500
1.4301 (304), 1.4401 (316), 1.4404 (316L), 1.4408 (316L), 1.4435 (316L),1.4568 (301), FKM, FKM with FEP coating

Operating pressureCleaning medium: 2 - 20 bar / 29 - 290 psi
Volume flow rate

0.6 - 7.2 m³/h / 10 - 120 l/min / 3 - 32 gpm (US)

Cleaning radiusmax. 5 m / 16.4 ft
Wetting radiusmax. 6 m / 19.7 ft
BearingsBall bearing, plain bearing
Number of nozzles2, optional: 1; 3 or 4
Nozzle bore2 - 6 mm, depending on expected cleaning power


The technical data of the ATEX units can differ from the standard units and this data is provided in the respective operating and installation instructions.